Limit switches XC Standard – XCKVR54D1H29 – Conveyor Belt Switch

Designed for hoisting and material handling applications Certified IP65 (resistant to dust and water jets) Meets UL, CSA, CCC, and CE standards Operates in a wide temperature range from -25°C to +70°C Offers an 18 month warranty

Description

The XCKV limit switches range is designed for hoisting and material handling applications. The XCKVR54D1H29 limit switch is composed of a fixed plastic (PBT-PC-GF30-FR) body and a rotary plastic (PBT-PC-GF30-FR) head. The fixing is done by the body. It has a 6mm metal stay put crossed square rods lever operator with a lateral approach (2 directions). The movement of operating head is rotary. It has twice two normally closed slow-break (staggered) contacts with positive opening operation. It has one cable entry tapped plus 2 breakout holes for M20 x 1.5mm cable gland and it is powered by screw-clamp terminals (clamping capacity : 1 x 0.5…2 x 2.5mm²). The contactor can perform an average of 1 million no-load operating cycles without mechanical failure. The XCKVR54D1H29 limit switch is made of a plastic (PBT-PC-GF30-FR) body and head. It weighs 0.32kg and measures 200mm in height, 200mm in width, and 57mm in depth. This limit switch complies with UL, CSA, CCC, and CE standards, and its protection level complies with IP65 (resistant to dust and water jets). Telemecanique Sensors limit switches are ideal for industrial environments : they are precise, robust, reliable, easy to install and offer high repeatability. A limit switch is a device that converts a mechanical motion into an electrical control signal.

Main
Range of productOsiSense XC
Series nameSpecial format
Product or component typeLimit switch
Product specific applicationFor hoisting and mechanical handling applications
Device short nameXCKMR
body typeFixed
Head typeRotary head
MaterialPlastic
Body material(PBT+PC)-GF30 FR
Head material(PBT+PC)-GF30 FR
Fixing modeBy the body
Movement of operating headRotary
Type of operatorStay put crossed rods lever metal square rod 6 mm, L = 200 mm
Type of approachLateral approach, 2 directions
Cable entry1 entry tapped and 2 breakout holes for M20 x 1.5 cable gland, cable outer diameter: 7…13 mm
Number of poles4
Contacts type and composition2 x (2 NC)
Contact operationSlow-break, staggered
Complementary
Switch actuationBy any moving part
Electrical connectionScrew-clamp terminals, clamping capacity: 1 x 0.5…2 x 2.5 mm²
Contacts insulation formZb
Number of steps5 electrical positions
Contact block per direction [control circuit]1 per direction
Positive openingWith
Positive opening minimum torque0.75 N.m
Minimum torque for tripping0.5 N.m
Minimum actuation speed6 m/min
Maximum actuation speed1.5 m/s actuation point on the rod between 65 and 95 mm
Maximum displacement angle-180 °
180 °
Contact code designationA300, AC-15 (Ue = 240 V), Ie = 3 A, Ithe = 10 A conforming to EN/IEC 60947-5-1 appendix A
Q150, DC-13 (Ue = 125 V), Ie = 0.55 A conforming to EN/IEC 60947-5-1 appendix A
[Ui] rated insulation voltage300 V conforming to UL 508
300 V conforming to CSA C22.2 No 14
500 V (pollution degree 3) conforming to EN/IEC 60947-1
Maximum resistance across terminals25 MOhm conforming to IEC 60255-7 category 3
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60664
6 kV conforming to EN/IEC 60947-1
Short-circuit protection10 A cartridge fuse, type gG
Mechanical durability1000000 cycles
Width200 mm
Height200 mm
Depth57 mm
Net weight0.32 kg
Terminals description ISO n°1(21-22)NC
(11-12)NC
Environment
Shock resistance50 gn conforming to EN/IEC 60068-2-27
Vibration resistance25 gn (f= 10…500 Hz) conforming to EN/IEC 60068-2-6
IP degree of protectionIP65 conforming to EN/IEC 60529
IK degree of protectionIK04 conforming to EN 50102
Electrical shock protection classClass II conforming to IEC 60536
Ambient air temperature for operation-25…70 °C
Ambient air temperature for storage-40…70 °C
Protective treatmentTC
Product certificationsUL
CSA
CCC
CE
StandardsUL 508
CSA C22.2 No 14
EN/IEC 60947-5-1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height9.0 cm
Package 1 Width7.7 cm
Package 1 Length19.5 cm
Package 1 Weight380.0 g
Unit Type of Package 2S02
Number of Units in Package 26
Package 2 Height15.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight2.883 kg
Unit Type of Package 3P06
Number of Units in Package 396
Package 3 Height80.0 cm
Package 3 Width80.0 cm
Package 3 Length60.0 cm
Package 3 Weight52.26 kg
Contractual warranty
Warranty18 months

Reviews

There are no reviews yet.

Be the first to review “Limit switches XC Standard – XCKVR54D1H29 – Conveyor Belt Switch”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Be the first to review “Limit switches XC Standard – XCKVR54D1H29 – Conveyor Belt Switch”

Your email address will not be published. Required fields are marked *